ACCESSORIES Back            
01SWT.jpg (36112 bytes)

Simple Switch can be used to replace a servo and micro-switch to control almost any accessory. Applications range from landing lights to water pumps. The Simple Switch will handle loads up to 3Amps from 3.6V to 22V. With universal style connector, only 21.5 grams.(0.76oz)

 

MODEL SWT3…………...…..…..MSR……$22.99

 

SST.jpg (3197 bytes)

Super Switch   is similar to the Simple Switch but can handle loads up to 10Amps at 1.2V to 22V weighs only 22.5g or 0.79oz.

 MODEL SWT10…………...…..…..MSR……$29.99

sr24.jpg (15748 bytes)

Servo Reverser   Use it like an extension cord for servos and the direction is reversed. 24" long

weighs only 7g or 0.2oz.

 MODEL SR24…………...…..…..MSR……$17.96

ACC01-2.jpg (14305 bytes)

V-Tail Mixer   Plug this into any two channels of the reciever and then plug two servos into this device and the mixer will provide a 50% mix. Use with elevator and rudder for V-Tail. Other possibilities are for ailevons, ailavators, and flaperons. With 12" leads.

weighs only 8g or 0.25oz.

 MODEL ACC01…………...…..…..MSR……$17.96